Ulta-Lit 01203-CD LightKeeper PRO Christmas Mini Light Set Repairing Tool

Defective Bulb shunts cause most light set failures. Simply plug your LightKeeper PRO into the light set and pull the trigger. Light Keeper PRO is a complete tool to repair most light sets by addressing the damaged bulb at the plug or at bulb socket. The LightKeeper PRO sends a pulse through the light set finding the bad bulb, fixes the shunt, allowing the light set to work properly.

• Complete tool for fixing light sets and pre-lit trees
• LED headlight helps visibility in light repair
• Audible continuity detector
• Traces the circuit to the point of interruption
• 3 way bulb puller easily helps tight bulbs from the sockets, bulb and fuse tester
• Test indoor or outdoor miniature bulbs
• Storage compartment built into the handle for bulbs and fuses
• Uses three 1.5 volt batteries, included

How the LightKeeper PRO Works

The LightKeeper PRO is the complete tool for fixing light sets and pre-lit trees. This one tool offers two easy methods to repair your lights: a Quick Fix Trigger and an Audible Voltage Detector. Most holiday light set failures occur when an individual bulb 'shunt' fails to energize as a filament burns out. To correct this, the Quick Fix Trigger sends a harmless pulse of electricity through the circuit to find and fix the shunt, lighting the unlit section. The LightKeeper's Audible Voltage Detector allows you to easily scan and find the circuit interruption at a bulb, broken wire, or poor contact where the voltage is blocked. The detector will beep before the location of the block and will not beep after, pinpointing the problem. Other features include LED headlight, bulb puller, light set socket connector, 5 spare mini light bulbs, and a built-in storage organizer in the handle. Three 1.5V button cell batteries are included.

Fixes most light sets in seconds using the Quick Fix Trigger

• Most miniature Holiday Light set failures occur when an individual bulb "shunt" fails to energize. These shunts are energized when a filament burns out. This causes a section of lights, usually 35 or 50, to go out instead of just one light bulb. This is because miniature light sets are wired in "series" and electricity must flow through each bulb, to the next, for them to light.The LightKeeper PRO Quick Fix Trigger sends a shaped, electrical pulse through the defective bulb, clearing the shunt. This allows it to operate properly. The current can then flow through the light set completing the circuit and illuminating the other bulbs.
• The Patented LightKeeper PRO is the first product to FIX defects in a light set with the squeeze of a trigger.